ALL MANTELS CAN BE ORDERED WITH A VARIETY OF HEARTHS.

Other Custom hearth sizes are available to meet your hearth needs and are quoted by request.

Beveled Edge Hearths Set  on the Ground

2” Bull-Nose Hearth  (20” deep by 74” wide by 2” thick)          $750

This hearth was set on top of existing brick hearth for a remodel

Raised Bull-Nose Edge Hearth     20” deep by 74” wide by 10” tall                $1,300

(Includes construction of cinder block sub-hearth)

Bull-Nose Edge Hearths on the Floor

Raised Hearths:  Bull-Nose Edge or Square Edge

NOTE: Please check both your local code and the manufacturer’s instructions to determine the proper depth of the hearth necessary for your firebox.  Wood burning fireplaces typically require a deeper hearth if a wood floor is installed up to the hearth.   Hearths are optional if ceramic or stone floors are installed up to the fireplace.

DISCLAIMER: HOMEOWNER AND CONTRACTOR ACKNOWLEDGE AND ACCEPT FULL RESPONSIBILITY FOR MEETING ALL FIREPLACE RELATED CODE REQUIREMENTS AND MANUFACTURER INSTALLATION REQUIREMENTS INCLUDING BUT NOT LIMITED TO HEARTH SPECIFICATIONS, FIRE-PROOFING RELATED TO SUB-FLOORS OR WOOD FLOORS, FIREBOX CONSTRUCTION AND FIRE-PROOFING FOR SITE BUILT FIREPLACES, PRE-MANUFACTURED FIREBOXES, AND ANY OTHER TYPE OF BOX INSTALLED.

2” Bull-Nose Hearth   (20” deep by 74” wide by 2” thick)            $750

This hearth is usually raised 3/4” to allow flooring to fit underneath

Raised Bull-Nose Edge Hearth   (10 1/2” deep by 74” wide by  10” tall)      $800

(Includes construction of cinder block sub-hearth )

© Copyright 2019

1” Beveled Edge Slab  (20” deep x 74” wide x 3/4” thick before mortar)           $650

This hearth is usually raised 3/4” to allow flooring to fit underneath

2” Bull-Nose Hearth  (16” deep by 74” wide by 2” thick)         $650

Raised Bull-Nose Edge Hearth      20” deep by 74” wide by 13” tall                   $1600

Raised Bull-Nose Edge Hearth     14” deep by 74” wide by 10” tall                    $1500

(Includes construction of cinder block sub-hearth)

Raised Square Edge Hearth     20” deep by 74” wide by 12” tall                 $1400

Raised Square Edge Hearth    14” deep by 74” wide by 10”, 12”  tall         $1300

(Includes construction of cinder block sub-hearth)

HEARTH  OPTIONS

We install Cast Stone Fireplace Mantels / Mantles  in Baton Rouge, Louisiana, Prairieville, La,  Dutchtown Louisiana,  Gonzales, La, St Amant, Louisiana, Sorrento, La, Donaldsonville, Louisiana, Slidell, La, Kenner, La,  Chalmette, Louisiana , Metairie, La, New Orleans, LA, Mandeville, Louisiana, Madisionville, LA, Covington, La, Slidell, La  Lafayette, Louisiana  Scott, La , New Iberia, Louisiana,  Morgan City, La, Lake Charles, Louisiana, Brusly, LA, Port Allen, Louisiana, Plaquemine, LA, New Roads, Louisiana, Pontchatoula, Louisiana, Denham Springs, LA, Livingston, Louisiana,  Walker, La, Hammond, Louisiana, Thibodeaux, La, Houma,  Alexandria, Louisiana, Shreveport, LA, Lake Charles, Louisiana,  LA,  St Francisville, La,, Mississippi, Houston Texas


Areas within 1 hour have an additional charge of $95. Areas within 1 hour and 2 hours add an additional charge of $125. Areas beyond 2 hours please call for quote.


Note: Our mantels are non-combustible & should exceed most building codes.


PLEASE NOTE THAT OVER TIME, SOME SHRINKAGE MAY OCCUR DUE TO NORMAL EXPANSION AND CONTRACTION.  BECAUSE THE MANTEL CONTAINS STEEL  REINFORCEMENT, THIS IN NO WAY AFFECTS THE STRUCTURAL INTEGRITY OF THE MANTEL.

1” Beveled Edge Slab  (16” deep x 74” wide x 3/4” thick before mortar)         $400

Links to Firebox Manufacturers:    Fire Rock     Superior     Mason Lite    Heat N Glow   Heatilator    Isokern     Majestic   Monessenhttps://www.firerock.us/products/masonry-fireplace-kithttp://superiorfireplaces.us.com/http://www.mason-lite.com/https://www.heatnglo.com/http://www.heatilator.com/https://earthcore.co/isokern/http://www.majesticproducts.com/https://www.monessenhearth.com/http://superiorfireplaces.us.com/shapeimage_17_link_0shapeimage_17_link_1shapeimage_17_link_2shapeimage_17_link_3shapeimage_17_link_4shapeimage_17_link_5shapeimage_17_link_6shapeimage_17_link_7